Large True Purple PLA 1.75mm, .9 kg. [2.0 lbs.]

Polylactic Acid Material (PLA)
SKU: MKB03-MP05778
P 4,222.22
  • Description

MAKERBOT® FILAMENT

MakerBot Filament sets the standard in its field. It undergoes a rigorous production process that includes exacting attention to detail, resulting in nearly seamless prints. Why is MakerBot Filament top notch?

PRECISE PRODUCTION

Our filament production process involves using laser micrometers to measure the filament diameter in real time as it’s being produced. A consistent diameter ensures smooth printing. Any deviation that occurs during processing triggers an alarm that immediately alerts the manufacturing team.

IN-HOUSE QUALITY CONTROL

Our MakerBot Quality Team pulls random spools for in-house spot checks through our own triple-axis laser micrometer. The entire spool is run from start to finish, and data is recorded to confirm there’s no deviation from our standards. If a filament issue arises, we trace the spool lot number back to the second it left the production extruder, adding to recorded data that reduces future issues. All colors are continuously reviewed and approved by MakerBot.

MAKERBOT PLA FILAMENT

•The best and most consistent filament for the MakerBot Replicator® 2 and all Fifth Generation MakerBot Replicator 3D Printers

• When used with MakerBot Replicator 3D Printers, helps produce higherquality prints, fewer filament problems, and less downtime

• Trusted by leading companies and institutions the world over

MAKERBOT ABS FILAMENT

• Optimized for MakerBot Replicator 2X Experimental 3D Printers


• When used with MakerBot Replicator 2X Experimental 3D Printers, helps produce higher-quality prints, fewer filament problems, and less downtime

• Great for designs that have interlocking or pin-connected pieces or are mechanical


MAKERBOT FLEXIBLE FILAMENT

• Optimized for MakerBot Replicator 2 Desktop 3D Printers

• Ideal for creating flexible hinges, joints, shaped parts, and items that can be shaped to fit the body

• Soft and easy to remold when heated with hot water; sets when cooled

MAKERBOT DISSOLVABLE FILAMENT

• Optimized for MakerBot Replicator 2X Experimental 3D Printers

• Specifically designed for use as a solid infill material with MakerBot ABS Filament

• Empowers you to create 3D prints with complexity, overhangs, and movable parts never before possible

• Easily dissolves in limonene (nontoxic detergent made from orange rinds) in just 8–24 hours

CONSISTENT DIAMETER MakerBot

is extremely particular about the diameter of our fi lament. Too much variation in the tolerance can result in a host of issues when printing. The MakerBot spool specifi cation is 1.75 mm (+/– .08 mm) and is controlled via defi ned quality checks in the manufacturing process

1 JAMMING/CLOGGING Filament that is too wide can halt the fl ow of the extruder, immediately causing prints to fail.


2 IRREGULAR FLOW Filament that is too wide or too thin will lay down more or less material than accounted for by the extruder, causing the quality of the print to suffer.


3 SLIPPING If the fi lament is too thin, the drive gear will not take a fi rm hold on the fi lament, resulting in thin areas in the print or a total clogging of the extruder.


4 OVALITY Ovality is the measure of how close the fi lament is to a perfect circle. MakerBot requires an extremely low ovality of .07, which is calculated in real time.

If the ovality is too high, then the fi lament cross-section is not circular. The distorted fi lament causes the extruder drive gear to slip on the fi lament, resulting in thin gaps or areas in the print.


5 VOIDS Voids are tiny pockets of air that occur within the fi lament. We require zero voids within our fi lament. Filament that contains voids can alter the amount of material extruded and thus the fi nal appearance of the print.

Product tags
fbq('track', 'ViewContent');